Category: Wood Burning Stove

Fireplaces: Electric Vs Wood burning Stoves

charnwoodstoves
21 Mar 2023

What is an Electric Stove and a Wood burning Stove?

An electric stove is one that uses electricity to produce heat and a wood burning stove, quite simply, burns wood for heat. They both have their advantages and disadvantages when it comes to cost, heat output and ease of use. This article will help you weigh up the pros and cons for your particular situation.

Electric Stove Benefits

Electric stoves are very easy to use, usually at the flick of a switch and can even be activated with a remote control. They also have relatively low purchase prices with many costing between £100-£500.

Because they use a heating element to warm up the room, there is no mess to clean up. This also means they also don’t need any vent or chimney, meaning they are easier to install, can be installed in more locations in the room and can easily be installed in apartments. This means the installation costs are lower than a wood burning stove.

If you have solar panels (or another form of harvesting renewable energy at home), you could be heating your house at a reduction.

 

Electric Stove Drawbacks

Perhaps the biggest drawback of electric fireplaces is if there’s a power cut, there’s no heat. One of the biggest causes of power cuts is storms damaging power supplies, and these usually take place in winter, which is just when you need your fireplace the most! This is a particular concern issue for those who live in rural or more remote locations.

The price of electricity is greater than that of wood and it’s sensitive to global fluctuations, meaning it can soar easily – as seen in the winter of 2022/23). In many cases, the production of electricity relies on burning fossil fuels, which isn’t sustainable.

While electric fireplaces can imitate the appearance of flickering flames, they lack the appeal of real flames and don’t have the comforting crackle or homely smells of a real fire.

Most electric fireplaces are only able to produce around 1.5kW or 5,000 BTU (British Thermal Units), whereas wood burning stoves typically generate 4 -10 kW (14,000 to 35,000 BTUs), with some going as high as 15kW (50,000 BTU). Also, the heat generated from electric fireplaces only stays in one room.

 

Wood burning Stove Benefits

Logs are the cheapest fuel for households, costing 74% less per kWh than electric heating. After installation, affordable wood burning stoves, including small wood burning stoves, are far more cost-efficient in heating your home than an electric fireplace.

Wood burning stoves in the UK also generate a lot more heat than electric fireplaces, comfortably producing 4-10kW (14,000-35,000 BTUs). This level of heat output, combined with the low costs of the logs, makes wood burning stoves incredibly efficient.

With a wood burning stove, you can funnel the heat to other parts of the house, not just the room it’s in; this additional use increases the efficiency of your wood burning stove.

Beyond their warmth, wood burning stoves provide the real sounds and smells of a crackling fire, creating an unparalleled experience of comfort and offering many well-being benefits.

Wood burning stoves need no electricity to work and so are immune to power cuts and price hikes.

 

Wood burning Stove Drawbacks

The initial installation of a wood burner, and a flue if necessary, isn’t cheap. The average installation, including the purchase of the stove itself, is about £2,000.

Wood burning stoves in the UK require the chimney to be swept at least once a year – as well as improving efficiency, this is vital for safety reasons.

You need to have somewhere dry to store your wood.

 

So which is better, an electric or wood burning stove?

While both have pros and cons, the low running costs and high heat output of wood burning stoves make them a clear winner in our book (even if we are slightly biased!)

Here at Charnwood, we sell a range of wood burning and multi-fuel stoves in contemporary and traditional styles, incorporating the latest in clean burn technology.

We’ve been committed to providing quality wood burning stoves since 1972 and we know all there is to know about wood burners, and how to get the most out of the wood you burn. If you have any questions about heating your home with a wood burning stove, please get in touch.

 

How Long Does It Take to Season Wood?

charnwoodstoves
21 Mar 2023

Seasoning wood refers to the drying process used in preparing firewood for being burnt. Wood that has been seasoned has been dried so that, when it is used in a fire, it has a lower moisture makeup and therefore produces less smoke and is easier to light.

Wood that is not properly seasoned and burnt in a wood stove or fireplace can lead to high creosote build-up in the chimney, which can cause chimney fires.

There are a few physical differences between seasoned wood and unseasoned wood:

• Unseasoned wood, due to its higher water content, is heavier

• The ends of seasoned wood are dark and cracked

• Seasoned wood, when tapped against one another, makes a hollow sound

• The bark of seasoned wood is a lot easier to peel than that of unseasoned wood

• There may be green patches on unseasoned wood

 

Factors to Consider when Drying Firewood

Water Content

For a log to be considered seasoned and suitable for burning, it needs to have a low moisture content. If you are drying your own firewood, you should use a moisture meter to determine how much water content your logs still have.

Using your moisture meter, you should keep drying your firewood until it is at least below 20% as a minimum but, ideally, under 10%. The more water there is in a log, the more smoke and less heat it will produce. Most green wood has a water content of around 50%+ when it’s freshly cut.

When acquiring wood you plan to use in a fire, a general rule of thumb is that the greener it is, the longer it will take to seasoning firewood.

 

Average Humidity and Temperature

Wood is a hygroscopic material, meaning the humidity around it can cause the wood to either absorb or release moisture. In areas with high humidity, wood will absorb moisture from the air, and in areas with low humidity, wood will expel moisture.

When it comes to seasoning wood, the obvious ideal combination is low humidity and high temperature, which makes the later days of spring and throughout the summer the best time to season wood.

In an environment with 99% relative humidity, the moisture content of wood will (with enough time) become 23-30% however, when the air has a relative humidity of 75%, the moisture content will work its way down to 14% – an ideal % for burning wood.

 

Wood Species

The kind of wood you use has a bearing on the rate at which wood is seasoned, whether that is hardwood or softwood.

Hardwoods produce more heat when they are burned but take about 18 months to properly season, whereas softwoods can be seasoned in 6-12 months and have the added bonus of being easier to cut and split, making them more appealing for many who cut and prepare their own wood.

The terms hardwood and softwood don’t actually apply to the woods themselves, but to the trees’ seeds: hardwood seeds have a covering while softwood seeds don’t.

When it comes to burning wood, a top tip is to use softwoods to get the fire going then hardwoods to have a long, enduring heat.

Cedar and pine are good softwoods to burn, while ash, oak, birch, fruit trees and even eucalyptus wood are great hardwoods for fires.

 

Proper Stacking

Wood should be stacked off the floor so as not to absorb ground moisture, and you need to allow plenty of ventilation between stacked logs so that moisture can escape.

When you are cutting your wood, cutting it to similar sizes will make it easier to stack. Cutting each log into 16-inch long cords is standard, and then cutting the wood into quarters is a popular and effective method.

Seasoning your wood outside is best, ideally in a location that gets plenty of sunlight. If you live in an area with high levels of rainfall, keeping it outside but covered (like in a barn or shed) is an option, so long as there is plenty of airflow around the wood. Don’t season your wood in your home as there is a risk the drying wood will attract termites; it will also not season properly when it’s indoors.

You can use a firewood log rack to help with the seasoning; these are metal frames that keep the logs off of the ground, promote airflow around the cords and can be positioned for optimal sunlight.

When stacking, you need to be sure any rain (or snow) won’t soak your logs. Avoid this by either storing them in a sheltered area or by protecting them with a waterproof cover, but be sure to keep the ends exposed to the air.

To find out everything you need to know about firewood, check out this blog.

 

Average Time to Season Wood

There are many variables when it comes to firewood seasoning and many ways to help speed up the seasoning process, however, the average time to season wood that you’ve cut from a tree is approximately 12 months. It can take an average of 6 months if you’ve bought the wood from a supplier.

Wood will dry out more quickly when it has been chopped into smaller pieces – the smaller the piece, the quicker it’ll wood seasoning. You can expect wood to dry at a rate of approximately one inch per year – i.e. a log that is one inch wide will take one year and a log that is two inches wide will take two years to seasoning firewood.

As well as splitting the wood into smaller pieces, you can also speed up the seasoning process by:

• Drying it in late spring or summer

• Stacking it correctly – plenty of ventilation between logs and ends exposed to the air

• Stacking it in bright, direct sunlight

• Dry it in a kiln

 

Also explore our Wood-Burning Stove FAQs.

 

Why Choose Us?

Charnwood has been committed to providing quality wood burning stoves since 1972 and we know all there is to know about wood burners, and how to get the most out of the wood you burn. If you have any questions about heating your home with a wood burning stove, please get in touch.

Log Burner Fireplace Ideas

charnwoodstoves
21 Mar 2023

Log burner fireplaces are a popular feature in many homes, adding warmth and ambience to any room. There are many ways to make the most of your log burner fireplace, from creating a warm welcome to colour-coordinating it with your decor. In this article, we’ll explore some log burner fireplace ideas to inspire your next home renovation project.

 

Ideal Fireplace Ideas for Your Home

You’ve had a wood-burning stove installed and are, quite rightly, loving the cosy comforting warmth that it brings, but you notice something’s just ever-so-slightly off. Framing your wood burner in a fireplace that ties into your décor can pull the whole room together. Keep reading for fireplace inspiration…

 

Create a Warm Welcome with a Modern Log Burner

A log burner fireplace creates a natural gathering spot in any room, making it the perfect place to entertain guests. To create a warm welcome, consider incorporating seating around your fireplace. This could include a comfortable armchair or a plush sofa, paired with blankets and decorative cushions.

To further enhance the cosy ambience, you could also add some soft lighting. This could include a few small lamps dotted about the room, some well-placed candles or even fairy lights. Adding a flame-retardant rug in front of the fireplace can also boost the welcoming vibe while protecting your floor from stray embers.

Another great way to create a warm welcome is to add some natural elements to your decor. Consider placing some plants or a vase of fresh flowers around your hearth, or adding some natural stone accents. These touches can help to create a comforting and rustic feel in your space.

 

Colour Coordinate Your Log Burner

When it comes to decorating your log burner fireplace, colour coordination is key. You want to choose colours that complement your log burner and create a cohesive look throughout your space. Some popular colour choices for log burner fireplaces include earthy tones like brown, beige, and green, as well as rich jewel tones like navy, emerald, and burgundy.

When choosing decor for your log burner fireplace, consider incorporating these colours into your cushions, rugs, curtains, and wall art. You can also add some decorative accessories in complementary colours, such as vases, candle holders, and picture frames.

Alternatively, if your log burner has a black finish, as most do, you could opt for black or dark grey accessories to tie the look together or contrast it with white décor for a monochromatic motif. For example, a white or cream fireplace surround would create a striking contrast against a black log burner. This leads us to the next section…

 

White Fireplace Surround

A white fireplace surround can add a clean and classic touch to your log burner fireplace. When paired with a black log burner, a white fireplace surround creates a timeless and elegant look and can work with both traditional and modern design schemes. White is also a great choice for smaller spaces, as it can help to create the illusion of more light and space.

To create a cohesive look, choose white decor accessories, such as candles, vases, and picture frames. You can also add some texture and interest to your space by incorporating natural wood elements.

 

Painted Fire Surround

A great way to add some personality to your wood burner fireplace is to paint your fire surround. This is a great option if you want to add a pop of colour to your space or create a bold statement. You can choose a colour that complements your decor, or go for something more daring, like a bright red or vibrant turquoise.

When choosing a paint colour for your fire surround, it’s important to consider the overall aesthetic of your living space. You want to choose a colour that complements your existing decor, rather than clashes with it.

Be sure to use high-quality paint that can withstand the heat from your log burner. You’ll also want to take your time and use a steady hand to ensure a smooth, even finish.

Explore more about our wood-burning strove design ideas.

 

Utilise a Hearth Surround

The hearth surround is the area directly in front of the log burner fireplace and a hearth surround not only enhances the look of the fireplace but also provides a practical space to store firewood and display decorative items.

A mantel can add a touch of elegance to your fireplace and provide additional space for displaying decorative items. Whether you prefer a rustic wooden mantel or a sleek, modern design, adding a mantel can elevate the overall look of your fireplace.

The material of the hearth surround can make a significant impact on the overall look of your fireplace. Popular materials for hearth surrounds include natural stone, tiles, brick, and wood. Each material can create a different aesthetic, so consider what style you want to achieve when choosing your hearth surround material.

A log burner fireplace needs firewood, and incorporating storage into your hearth surround can be a practical solution. Not only does built-in shelving or a firewood nook provide designated storage space for firewood, but it also adds a decorative touch to the fireplace.

Explore our spares shop to find your perfect hearth surround.

 

Why Choose Us?

Charnwood has been committed to providing quality wood burning stoves since 1972 and we know all there is to know about wood burners, and how to make sure they look great in your home. If you have any questions wood burning stoves, please get in touch.

 

Can You Burn Eucalyptus Wood? Everything You Need to Know

charnwoodstoves
06 Mar 2023

Eucalyptus trees, also known as gum trees, are fast-growing trees whose wood produces a lot of heat, making them an ideal sustainable choice for your wood burning stove. While not native to the UK, some eucalyptus species have been able to thrive on these western European islands, giving us access to this superfuel.

 

Benefits and Disadvantages of Using Eucalyptus

Benefits

It produces a high heat output – 34.5 million BTUs (British Thermal Units) per cord; for context, oak produces 24 million BTUs.

Eucalyptus grows quickly, only taking a few years to mature, making it one of the more sustainable firewoods and it doesn’t taper much over lengths.

It’s also cheaper than other traditional hardwoods.

 

Disadvantages

Eucalyptus trees aren’t native to the UK, and, because of their numbers in this part of the world, eucalyptus wood is rarer than other woods.

Its high oil content can lead to a build-up of creosote, but otherwise, it burns clean.

It’s also a very hard wood to split – more on this in a later section.

 

Types of Eucalyptus

There are over 700 different species of the eucalyptus tree and they are mostly found in Australia, although some are also found in areas like the Philippines, Indonesia and New Guinea. Some have been successfully introduced to grow in Britain (see above).

Of the 700 different species, only 35 (5%) are suited to growing in the UK. Two of note are the cider gum and Tasmanian blue gum trees, which grow quite happily on the Essex coast and in Cornwall, respectively.

The best eucalyptus trees for firewood that can grow in the UK are eucalyptus nitens (Shining Gum) and eucalyptus viminalis (White Gum).

 

Is Burning Eucalyptus Poisonous?

If you were to eat (great swathes of) eucalyptus leaves, you may become unwell, however, the smoke of eucalyptus wood is not toxic.

 

Is Burning Eucalyptus Bad for the Chimney?

If eucalyptus wood is properly seasoned, the wood is not bad for the chimney. Eucalyptus wood has a naturally high oil content and this may be considered dangerous, however, seasoning the eucalyptus removes much of this oil and, consequently, the risk.

You should have your chimney cleaned every year as a minimum, regardless of which wood you use. This is to remove soot, cobwebs, bird nests, other blockages and creosote to allow for the safe passage of smoke and to prevent chimney fires.

 

Does the Wood Split Easily?

No. Eucalyptus wood is notoriously difficult to split. If you can buy it pre-split, it’ll save you a lot of effort.

If you want to split the wood yourself, you are best to leave it for 5-7 days after it’s been cut, and before you season it. Just before it reaches the week mark, cracks will start to form in the wood; this is the best time to start splitting the wood.

Also explore our Wood-Burning Stove FAQs.

 

Heat Output and Efficiency of Eucalyptus

As mentioned above, eucalyptus packs a punch in the heat department: it produces 34.5 million BTUs and has a very strong flame.

Eucalyptus wood also produces good coals, keeping your home warm for longer after the fire itself is out.

Some worry that burning eucalyptus wood produces too much heat, so you can mix eucalyptus wood with other woods if you are concerned about excess heat.

 

Why choose us?

Charnwood has been committed to providing quality wood burning stoves since 1972 and we know all there is to know about wood burners and the best woods to use in them. If you have any questions about heating your home with a wood burning stove, please get in touch.

Is a Log Burner Cheaper than Gas?

charnwoodstoves
03 Mar 2023

In light of energy prices rising to unprecedented rates, more people than ever before are looking at alternative ways to heat their homes and stay warm. The cost of gas and electricity is more expensive than ever before due to factors such as a rise in import costs, an increase in global demand, and supply issues caused by global conflicts.

This has led to many people looking for alternative sources of heat, especially as the cost of living crisis pushes households to their limits financially. One source of heat that has experienced a noticeable increase in demand is the wood-burning stove. But is it more cost-effective to use a wood-burning stove rather than central heating?

We’ve created a helpful guide outlining everything you need to know about wood-burning stoves and whether or not they are a cheaper alternative to gas.

 

The rising price of gas and electricity

Domestic energy prices are at an all-time high due to the extremely volatile nature of the energy market, causing prices to increase at rates we have never seen before.

The cost of gas has increased by 141% since winter 2021/2022 and experts are advising that these eye-watering prices will continue to soar with bills going up again in April 2023, many households have found themselves in the position where they are simply not able to afford to heat their homes.

The good news is, there are alternatives available, including the wood-burning stove.

 

The advantages of using a wood-burning stove

There are a number of advantages of using a wood-burning stove, including:

•  A wood burner could reduce your heating bills by up to 10%, according to the Energy Saving Trust.

•  Under the current price cap, a woodburning stove costs around 13% less than gas central heating, and one-third of the price of electric heating.

•  Efficient – log burners have around 75-90% efficiency.

•  Eco-friendly and wood is a renewable, sustainable fuel source.

•  Increases the value of your property.

•  Aesthetically pleasing and good for mental well being.

 

The drawbacks of using a wood-burning stove

If you’re considering investing in a wood-burning stove for your property, it’s important that you also weigh up any potential cons too. After all, installation can be expensive, so it’s vital that you understand what is involved with the upkeep of a wood-burning stove and the costs involved.

Here are some of the potential drawbacks to keep in mind:

•  If you don’t already have a wood burner, the initial expense can range from £500 – to over £5000, with installation costing on average £2,000.

•  You will need enough space to accommodate a wood-burning stove.

•  Storage space is required for logs to ensure they get plenty of air and stay dry.

•  On-going upkeep and maintenance.

•  A wood-burning stove can’t always be used to heat your entire home, although residual heat can spread around the house.

 

The advantages of using central heating

In order to evaluate whether or not a log burner is cheaper and better than a wood-burning stove, we’ve also taken a look at the advantages that come hand in hand with using central heating:

•  Central heating creates a warm and comfortable home pretty much instantly. After all, on a freezing cold day, there really is nothing better than stepping into a home that is warm and toasty!

•  Convenient and flexible.

•  Central heating creates an even temperature.

•  Modern central heating makes minimal noise.

 

The drawbacks of using central heating

Like any heating system, you should also take into account the drawbacks of using a central heating system when deciding whether this is the best option for you.

The most common drawbacks of using a central heating system are as follows:

•  Installation is expensive

•  Operating costs are significantly higher

•  Poor duct connections can lower the efficiency of the system

•  Costly repairs

•  Costs vary depending on the cost of gas and electricity, which are currently increasing.

 

 

The end result

As you can see, there is a lot to weigh up when it comes to the pros and cons of both log burners and central heating systems.

However, if you are looking to cut the costs of your heating bills, a wood-burning stove wins every time. A wood-burning stove can cost around a third of the price of electric central heating to run.

If you would like to find out more about our wood-burning stoves, view our FAQs page here.

 

Why choose us?

Founded in 1972, Charnwood Stoves are a privately owned, family-controlled, British company specialising in the design and manufacture of high-quality wood-burning and multi-fuel stoves. We are committed to providing the highest quality stoves, at the best possible price.

We also have a firm focus on protecting the environment and ensuring our operations are sustainable and responsible.

We operate a policy of caring for the environment in all aspects of the business; from the products we design and the way we package and we transport them, to the way we deal with the disposal of waste products, as well as the vehicles we use and our choice of raw materials.

 

Get in touch now

If you have any questions about our wood-burning stoves, please get in touch with a member of our team today.

Why burning the RIGHT wood saves you money & protects the environment!

charnwoodstoves
23 Jan 2023

With the cost-of-living crisis biting, we are all looking for ways to save money – particularly on our bills! If you own a wood-burning stove you are in a stronger position than most, however, we urge you not to cut corners and always use appropriate fuel. Following stove best practices are vital for the environment, your health and ultimately in the medium to long term, your pockets!

Read on to learn more about woodstove best practices and how following them saves you money!

Burning the right fuel

It is very important to only burn wood with a moisture content of 20% or less. This will keep harmful emissions to a minimum and significantly improve efficiency while protecting your stove and chimney – saving you money!

Look out for the Woodsure Ready to Burn label which guarantees a moisture content of 20% or less.

For a list of approved firewood sellers in your area click here.

What not to burn

Here are some of the key things to avoid burning. Please note this is not an exhaustive list.

-Unseasoned or wet wood (moisture content above 20%)

-Plywood offcuts, chipboard and MDF are not advised due to the glues used to make them.

-Avoid old/recovered wood that has been treated or old painted wood as these can be toxic.

-Do not burn rubbish.

-Printed papers are coated with chemicals and can cause troublesome ash deposits.

-Natural or synthetic fibres, such as fabric, burn too fast and can be toxic.

-Any solvents or chemicals and substrates potentially exposed to them.

How long does firewood usually take to season/dry?

Firewood takes approximately 12 months to season, however, there are ways (set out below) that can help reduce the time it takes.

How to speed up the seasoning/drying process

SPLIT wood into logs in a size to suit your stove no larger than 15cm (6”) in diameter. Split some smaller pieces to use as kindling.

STACK the wood in a place that gets plenty of sun and ventilation. An untidy pile of wood may rot before it has time to season, so make sure the logs are stacked in a way that allows air to circulate. Ideally, keep the stack off the ground and away from the house and stack the wood bark side down, except for the top row:

Never stack logs above head height to prevent injury from falling logs.

COVER the stack to protect it from rain and snow. You can cover just the top, or the sides as well – just make sure the air can get in and that moisture isn’t getting trapped.

STORE the wood for 18-24 months or until the moisture content is below 20% (you can test this with a Moisture Meter). It’s a good idea to bring wood inside two or three days before you intend to burn it to make sure it’s properly dried out and ready to use.

Caution – what not to do

Don’t stack wood against your wood-burning stove! Whilst it may look attractive, stacking wood to dry around or against your stove is a significant fire risk. It is vital that safety clearances to combustibles are maintained.

For all the required info please read: Setting Clearances & Installing Heat Shields for your fireplace.

Potential free sources of wood

1. After a storm

After a storm, fallen trees and branches become available which, with permission, you can collect. This would need to be seasoned before use.

2. Industrial woodworkers

Woodworkers, sawmills, and joiners near to your home are worth contacting to find out if they ever have any offcuts of wood that they need to get rid of. This is likely to be dryer than other sources with the potential to be used straight away.

3. Online

Whether it is leftover wood from a recent home improvement or a tree that had to be cut down, people often advertise free wood on websites like Gumtree and Freecycle if you are happy to collect it. Make sure to check it with a moisture meter before using.

What is the perfect wood-burning temperature?

The ideal wood-burning temperature range is between 140 and 240 degrees Celsius (284 to 464 degrees Fahrenheit) which avoids damage to the stove and potential creosote buildup.

How to adjust the fire temperature?

To reach a sufficient temperature, ensure a good draft, use seasoned wood and build the fire correctly ensuring your fire burns hot enough. To reduce the temperature of your fire when in use, you can close the air vents.

You can use a Flue Pipe Thermometer to make sure you are burning wood in the perfect temperature range.

For more wood-burning stove tips please read:

https://www.charnwood.com/8-tips-wood-stove-users-holiday-season/

7 ways to maximise your wood-burning stove’s efficiency

charnwoodstoves
20 Dec 2022

At Charnwood, a key part of our mission is to maximise wood-burning efficiency. Our revolutionary Blu technology means our stoves achieve ClearSkies ratings of 5/5 stars, while easily outperforming Ecodesign regulation requirements. We believe this is vital work when considering all the myriad benefits wood burning offers the individual and society. Carbon neutrality, significant well-being benefits, heat security and perhaps most importantly right now, low-cost fuel.

If you’ve already upgraded to an Ecodesign stove but are still looking for ways to improve efficiency, then please read on. In this post, we will discuss 7 great ways to make your stove work even harder for you and the environment!

1. Use a stove pipe thermometer

A Stove or Flu pipe thermometer is an essential piece of equipment that allows you to accurately monitor your stove’s temperature. This helps burn wood efficiently, protecting your stove and chimney, while reducing emissions and maximising heat output.

“Makes it so much easier to see if my fire is working at optimum temperature and if I need to adjust the amount of wood/air flow.” Charnwood customer from the 2022 stove accessory survey

Additionally, we recommend keeping your stove glass clean so you can monitor your fire and gauge its intensity. As you become more experienced you will be able to better predict the necessary interventions for gaining maximum efficiency.

2. Burn only dry, seasoned wood for better combustion

It’s important to burn only dry, seasoned wood with a moisture content of 20% or below. Wet wood (anything above 20%) doesn’t burn as well, leading to low efficiency and more smoke and pollutants.

Seasoned wood is wood that has been cut and usually allowed to dry for at least 6-12 months. You can roughly estimate if wood is seasoned by its lighter weight when compared to wet wood and telltale cracks in the end grain. However, to be sure, we strongly recommend using a moisture meter to accurately check the moisture content.

Better still, you can purchase kiln-dried wood from an approved firewood seller. Click here to search in your area.

3. Use a heat shield to direct more heat into the room

You can reduce your stove’s clearances to combustibles and direct more heat back into the room with a Vlaze heatshield. Vlaze heat shields and hearth plates protect walls and floors from high temperatures and help reflect heat back into your room – they look great too!

4. Harness your stove’s heat for cooking and boiling the kettle

If you have a wood-burning stove, you can harness your stove’s heat for cooking with cast iron pots and pans. This is a fantastic way to save energy while heating your home! For everything you need to know about cooking with your stove click here.

5. Check the seals on your stove

It’s important to make sure that the seals on your stove are tight. If the seals become too loose, this will reduce the efficiency of your stove and could allow smoke into your home. To check the seals, simply look at the gasket (rope seal) around the door of your stove. If it’s not snug against the door, then it needs replacing. You should also check the seal around the chimney to prevent any escape. Taking just a few minutes to check the seals on your wood-burning stove, will help you keep your home safe and warm all winter long.

If you’re still not sure how to check the seals, consult your stove owner’s manual or contact a qualified technician.

6. Don’t overfill the stove – allow for air circulation

It’s important not to overfill the firebox of your wood-burning stove. This allows proper air circulation which is key to ensuring an even and efficient burn. A good rule of thumb is to fill the firebox no more than halfway so the wood gets enough oxygen to burn properly. If not wood will smoulder which can cause creosote buildup, a flammable substance that can cause chimney fires.

7. Regularly clean out ash and soot from inside the stove

It’s important to regularly clean out the ash and soot that builds up inside. This helps keep the stove looking clean and improves efficiency as ash and soot can block the airflow inside the stove, making it difficult for the fire to breathe.

How often you clean will depend on how often the stove is used, but generally, it is best to do a thorough cleaning once every couple of weeks.

We highly recommend using an ash carrier to make the process much easier and mess-free!

_____________

Using a wood-burning stove is a great way to heat your home, cook meals, and save money on energy costs. However, it is important to take proper maintenance steps to ensure optimal performance. With these tips, you can enjoy the warmth of your fire this winter knowing you are being as efficient as possible!

Merry Christmas from Charnwood & A.J Wells

charnwoodstoves
19 Dec 2022

Every year we send a limited-edition Charnwood calendar to each of our fantastic Charnwood stockists. It has become something of a tradition and a nice way to share some beautiful artwork and our latest wood-burning stove images.

We are delighted that the wonderful author/illustrator, Rachel Bright, has generously given us a beautiful graphic poem to take pride of place on this year’s front cover.

It’s so wonderful, in fact, that we just had to share it with you.

Meet me by the fire at midnight 

by Rachel Bright

Doesn’t it just capture the imagination? It weaves a story that surely resonates with anyone lucky enough to own a wood-burning stove – it really makes you want to light the fire and snuggle!

Most of us have our own magical stories that were only possible due to the warm and cosy focal point the fire provides. Bone warming heat and mesmerizing flames that draw loved ones together and into orbit around the woodstove on a cold winter’s night.

And to some peoples’ surprise, many of us actually look forward to winter precisely because of the joy our wood-burning stove brings.

With all the uncertainty in the world, it’s truly comforting to sit back on a cold night with a warm fire blazing. Knowing that you can depend on it whatever the weather and circumstances in the wider world. This is a huge motivator for us to continue creating the latest, most efficient stoves on the market and contribute to a more sustainable future.

_________________

All of us here at Charnwood and A.J Wells & Sons wish you a very merry, warm and toasty Christmas.

Chief Medical Officer’s Annual Report Supports EcoDesign Stoves

charnwoodstoves
19 Dec 2022

Chief Medical Officer, Professor Chris Whitty, well known to us all from our lockdown television screens, has just released an annual report on air quality in the UK. The Stove Industry Association (SIA) made a significant contribution, and the resulting report provides a fair and balanced appraisal. The findings confirm much of what the wood-burning stove community has been saying for some years now. 

The report highlights the issues with open fires and old woodstoves and endorses the use of modern Ecodesign wood-burning stoves and encourages the use of best wood-burning stove practices. 

Air pollution emissions can be significantly reduced “…using modern, less polluting stoves and burning wood that is dry”. Additionally, “For air pollution emissions, there is substantial difference between the different open fire and stove designs, the age of the appliance and how well maintained it is, and the moisture content of the wood, for those who want to burn wood.” 

Chair of the SIA, Andy Hill, commented: “In this Report the CMO and his team have considered a wide range of contributors to air pollution from industry, transport, and transboundary sources, as well as domestic solid fuel heating. We are pleased that the report recognises the huge advances in stove appliance technology that have been driven by the Ecodesign regulations and that it calls for the Clean Air Act requirements for smoke control areas to be properly adhered to. The report also highlights potentially ground-breaking new technology in some industries, and, similarly, the stove industry continues to develop and invest in new technology to reduce emissions even further.” 

The myriad benefits of wood burning 

 

The report recognises that the reasons for burning solid fuel in the home are varied with Professor Whitty noting that these include “aesthetic as well as practical, ecological or economic reasons”. 

This line is important and acknowledges the unique qualities wood-burning stoves possess. It is something that we feel should be more fully recognised when making evaluations and comparing the overall impact of each home heating solution. 

The myriad benefits wood burning offers the individual and society cannot be fully replicated by any other heating solution. Wood-burning stoves offer potential carbon neutrality, significant well-being benefits, heat security and perhaps most importantly right now, low-cost fuel.  

Wood burning – the past, present and the future 

With the recent positive progress of nuclear fission in the news, there is real hope on the far horizon for an energy source that transforms our society. However, even when this possibility is realized, likely many decades into the future, there will still be a strong argument for wood burning stoves. Perhaps not as a main source of domestic heating, but as a tool for connection and social bonding, while offering a supplementary heat source for when inevitable interruptions of supply occur.  

Until then, wood-burning stoves have a key role to play in helping families through the challenging times we all face. No other heat solution can provide such a range of benefits that help so directly with the cost-of-living crisis and contribute to the environmental goal of Net Zero 2050. 

 

The Making of a Charnwood C-Four Stove

charnwoodstoves
23 Nov 2022

latest cutting-edge equipment and exceptional craftsmanship. In this blog, we will share with you some of the processes involved in making a Charnwood Stove from our UK-based factory on the Isle of Wight.

Metal fabrication

 

To create a high-performing and durable stove, we select the best of British sheet steel as the base metal substrate. The steel meets BS EN 10209 standards.

Laser cutting the steel

 

Our high-tech laser cutter is then used to produce accurately shaped component parts. The tolerance of this system is 0.2 mm with the ability to cut materials from 0.5mm up to 25 mm in thickness. This level of accuracy allows us to achieve sleek finishing touches on even the smallest details.

Shaping the metal

 

The stove’s body panels are formed to the required shapes and sizes with just a 2mm margin of error.

Welding the metal

 

Our welding process involves cutting-edge robotics as well as our extremely experienced and skilled team members, who have a combined 50 years of experience in the manufacturing industry.

Refining components

 

Smaller components receive finishing touches by hand.

Spraying high-temperature stove paint

 

After rinsing and neutralising the metal, our skilled team uses a spray gun to apply even coats of our specially formulated high-temperature stove paint. In addition to the standard Charnwood Black, we also offer you a choice of seven other beautiful shades.

Drilling & Assembly

 

After the drilling is complete, we move on to assembly. We carefully put all the pieces together, making sure that everything is aligned correctly and functioning optimally. Once the stove is assembled, we conduct a series of tests to ensure that it meets our high standards.

Packing & Shipping

 

Each stove is signed off by one of our experts before being processed for shipping. We continue to look for ways to reduce excess packaging while aiming to use environmentally friendly materials and encouraging reuse where possible. You can read more here.

_____________

We take great pride in the products we produce at Charnwood. That’s why every one of our wood-burning stoves is handcrafted with care and precision. We hope that this behind-the-scenes look at how we make our stoves has given you a better understanding of the love, care and attention that goes into every Charnwood Stove.

If you are interested in finding out more, we highly recommend contacting an official Charnwood stockist.